ADC_13 (R16, R16)

With unroll_count=500 and no inner loop

Code:

   0:	66 45 11 c8          	adc    r8w,r9w

Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 1.0
- Reference cycles: 0.77
- UOPS_EXECUTED.THREAD: 1.0
- RETIRE_SLOTS: 1.0
- UOPS_MITE: 1.05
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 0.5
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.17

With loop_count=1000 and unroll_count=10

Code:

   0:	66 45 11 c8          	adc    r8w,r9w

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 1.0
- Reference cycles: 0.75
- UOPS_EXECUTED.THREAD: 1.1
- RETIRE_SLOTS: 1.1
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 0.6
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	66 45 11 c8          	adc    r8w,r9w

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 1.0
- Reference cycles: 0.75
- UOPS_EXECUTED.THREAD: 1.01
- RETIRE_SLOTS: 1.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 0.51
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With additional dependency-breaking instructions

With unroll_count=500 and no inner loop

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w

Show nanoBench command
Results:
- Instructions retired: 2.0
- Core cycles: 1.0
- Reference cycles: 0.77
- UOPS_EXECUTED.THREAD: 2.0
- RETIRE_SLOTS: 2.0
- UOPS_MITE: 2.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.49
- UOPS_PORT_1: 0.29
- UOPS_PORT_6: 0.51
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.69
- UOPS_PORT_5B>=2: 0.17
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.38

With loop_count=1000 and unroll_count=10

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w

Show nanoBench command
Results:
- Instructions retired: 2.2
- Core cycles: 1.0
- Reference cycles: 0.75
- UOPS_EXECUTED.THREAD: 2.1
- RETIRE_SLOTS: 2.1
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.32
- UOPS_PORT_6: 0.6
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.68
- UOPS_PORT_5B>=2: 0.21
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w

Show nanoBench command
Results:
- Instructions retired: 2.02
- Core cycles: 1.0
- Reference cycles: 0.75
- UOPS_EXECUTED.THREAD: 2.01
- RETIRE_SLOTS: 2.01
- UOPS_MITE: 0.02
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.32
- UOPS_PORT_6: 0.51
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.68
- UOPS_PORT_5B>=2: 0.25
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	66 45 11 c8          	adc    r8w,r9w
   4:	66 45 11 ca          	adc    r10w,r9w
   8:	66 45 11 cb          	adc    r11w,r9w
   c:	66 45 11 cc          	adc    r12w,r9w

Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 4.0
- Reference cycles: 3.04
- UOPS_EXECUTED.THREAD: 4.0
- RETIRE_SLOTS: 4.0
- UOPS_MITE: 4.28
- UOPS_MS: 0.0
- UOPS_PORT_0: 2.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 2.0
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.72

With loop_count=1000 and unroll_count=2

Code:

   0:	66 45 11 c8          	adc    r8w,r9w
   4:	66 45 11 ca          	adc    r10w,r9w
   8:	66 45 11 cb          	adc    r11w,r9w
   c:	66 45 11 cc          	adc    r12w,r9w

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 4.0
- Reference cycles: 3.02
- UOPS_EXECUTED.THREAD: 4.5
- RETIRE_SLOTS: 4.5
- UOPS_MITE: 0.01
- UOPS_MS: 0.01
- UOPS_PORT_0: 2.01
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 2.49
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	66 45 11 c8          	adc    r8w,r9w
   4:	66 45 11 ca          	adc    r10w,r9w
   8:	66 45 11 cb          	adc    r11w,r9w
   c:	66 45 11 cc          	adc    r12w,r9w

Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 4.0
- Reference cycles: 3.0
- UOPS_EXECUTED.THREAD: 4.05
- RETIRE_SLOTS: 4.05
- UOPS_MITE: 0.03
- UOPS_MS: 0.02
- UOPS_PORT_0: 2.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 2.05
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With additional dependency-breaking instructions

With unroll_count=200 and no inner loop

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	66 45 11 ca          	adc    r10w,r9w
   b:	66 45 11 cb          	adc    r11w,r9w
   f:	66 45 11 cc          	adc    r12w,r9w

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 2.43
- Reference cycles: 1.76
- UOPS_EXECUTED.THREAD: 5.0
- RETIRE_SLOTS: 5.0
- UOPS_MITE: 4.85
- UOPS_MS: 0.19
- UOPS_PORT_0: 2.0
- UOPS_PORT_1: 0.25
- UOPS_PORT_6: 2.01
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.75
- UOPS_PORT_5B>=2: 0.01
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.98

With loop_count=1000 and unroll_count=2

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	66 45 11 ca          	adc    r10w,r9w
   b:	66 45 11 cb          	adc    r11w,r9w
   f:	66 45 11 cc          	adc    r12w,r9w

Show nanoBench command
Results:
- Instructions retired: 6.0
- Core cycles: 2.42
- Reference cycles: 1.83
- UOPS_EXECUTED.THREAD: 5.5
- RETIRE_SLOTS: 5.5
- UOPS_MITE: 0.0
- UOPS_MS: 0.02
- UOPS_PORT_0: 2.1
- UOPS_PORT_1: 0.32
- UOPS_PORT_6: 2.4
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.69
- UOPS_PORT_5B>=2: 0.11
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	66 45 11 ca          	adc    r10w,r9w
   b:	66 45 11 cb          	adc    r11w,r9w
   f:	66 45 11 cc          	adc    r12w,r9w

Show nanoBench command
Results:
- Instructions retired: 5.1
- Core cycles: 2.36
- Reference cycles: 1.78
- UOPS_EXECUTED.THREAD: 5.05
- RETIRE_SLOTS: 5.05
- UOPS_MITE: 0.03
- UOPS_MS: 0.02
- UOPS_PORT_0: 2.0
- UOPS_PORT_1: 0.28
- UOPS_PORT_6: 2.05
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.71
- UOPS_PORT_5B>=2: 0.02
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With additional dependency-breaking instructions (before each instruction)

With unroll_count=200 and no inner loop

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 ca          	adc    r10w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 cb          	adc    r11w,r9w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 cc          	adc    r12w,r9w

Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 2.39
- Reference cycles: 2.16
- UOPS_EXECUTED.THREAD: 8.01
- RETIRE_SLOTS: 8.0
- UOPS_MITE: 7.83
- UOPS_MS: 0.18
- UOPS_PORT_0: 2.0
- UOPS_PORT_1: 1.25
- UOPS_PORT_6: 2.03
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 2.71
- UOPS_PORT_5B>=2: 0.89
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.63

With loop_count=1000 and unroll_count=2

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 ca          	adc    r10w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 cb          	adc    r11w,r9w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 cc          	adc    r12w,r9w

Show nanoBench command
Results:
- Instructions retired: 9.0
- Core cycles: 2.39
- Reference cycles: 1.8
- UOPS_EXECUTED.THREAD: 8.51
- RETIRE_SLOTS: 8.5
- UOPS_MITE: 0.0
- UOPS_MS: 0.02
- UOPS_PORT_0: 2.13
- UOPS_PORT_1: 1.31
- UOPS_PORT_6: 2.37
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 2.69
- UOPS_PORT_5B>=2: 1.23
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 ca          	adc    r10w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 cb          	adc    r11w,r9w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 cc          	adc    r12w,r9w

Show nanoBench command
Results:
- Instructions retired: 8.1
- Core cycles: 2.33
- Reference cycles: 1.73
- UOPS_EXECUTED.THREAD: 8.05
- RETIRE_SLOTS: 8.05
- UOPS_MITE: 0.06
- UOPS_MS: 0.02
- UOPS_PORT_0: 2.01
- UOPS_PORT_1: 1.31
- UOPS_PORT_6: 2.04
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 2.68
- UOPS_PORT_5B>=2: 1.19
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	66 45 11 c8          	adc    r8w,r9w
   4:	66 45 11 ca          	adc    r10w,r9w
   8:	66 45 11 cb          	adc    r11w,r9w
   c:	66 45 11 cc          	adc    r12w,r9w
  10:	66 45 11 cd          	adc    r13w,r9w
  14:	66 45 11 ce          	adc    r14w,r9w
  18:	66 44 11 cb          	adc    bx,r9w
  1c:	66 44 11 c9          	adc    cx,r9w

Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 7.99
- Reference cycles: 5.92
- UOPS_EXECUTED.THREAD: 8.0
- RETIRE_SLOTS: 8.0
- UOPS_MITE: 8.16
- UOPS_MS: 0.0
- UOPS_PORT_0: 4.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 4.0
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.43

With loop_count=1000 and unroll_count=1

Code:

   0:	66 45 11 c8          	adc    r8w,r9w
   4:	66 45 11 ca          	adc    r10w,r9w
   8:	66 45 11 cb          	adc    r11w,r9w
   c:	66 45 11 cc          	adc    r12w,r9w
  10:	66 45 11 cd          	adc    r13w,r9w
  14:	66 45 11 ce          	adc    r14w,r9w
  18:	66 44 11 cb          	adc    bx,r9w
  1c:	66 44 11 c9          	adc    cx,r9w

Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 8.0
- Reference cycles: 6.0
- UOPS_EXECUTED.THREAD: 9.0
- RETIRE_SLOTS: 9.01
- UOPS_MITE: 0.0
- UOPS_MS: 0.03
- UOPS_PORT_0: 4.03
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 4.97
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	66 45 11 c8          	adc    r8w,r9w
   4:	66 45 11 ca          	adc    r10w,r9w
   8:	66 45 11 cb          	adc    r11w,r9w
   c:	66 45 11 cc          	adc    r12w,r9w
  10:	66 45 11 cd          	adc    r13w,r9w
  14:	66 45 11 ce          	adc    r14w,r9w
  18:	66 44 11 cb          	adc    bx,r9w
  1c:	66 44 11 c9          	adc    cx,r9w

Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 8.0
- Reference cycles: 6.03
- UOPS_EXECUTED.THREAD: 8.1
- RETIRE_SLOTS: 8.1
- UOPS_MITE: 0.04
- UOPS_MS: 0.04
- UOPS_PORT_0: 4.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 4.1
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With additional dependency-breaking instructions

With unroll_count=100 and no inner loop

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	66 45 11 ca          	adc    r10w,r9w
   b:	66 45 11 cb          	adc    r11w,r9w
   f:	66 45 11 cc          	adc    r12w,r9w
  13:	66 45 11 cd          	adc    r13w,r9w
  17:	66 45 11 ce          	adc    r14w,r9w
  1b:	66 44 11 cb          	adc    bx,r9w
  1f:	66 44 11 c9          	adc    cx,r9w

Show nanoBench command
Results:
- Instructions retired: 9.0
- Core cycles: 4.0
- Reference cycles: 2.88
- UOPS_EXECUTED.THREAD: 9.0
- RETIRE_SLOTS: 9.0
- UOPS_MITE: 9.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 4.0
- UOPS_PORT_1: 0.28
- UOPS_PORT_6: 4.0
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.73
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.64

With loop_count=1000 and unroll_count=1

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	66 45 11 ca          	adc    r10w,r9w
   b:	66 45 11 cb          	adc    r11w,r9w
   f:	66 45 11 cc          	adc    r12w,r9w
  13:	66 45 11 cd          	adc    r13w,r9w
  17:	66 45 11 ce          	adc    r14w,r9w
  1b:	66 44 11 cb          	adc    bx,r9w
  1f:	66 44 11 c9          	adc    cx,r9w

Show nanoBench command
Results:
- Instructions retired: 11.0
- Core cycles: 4.74
- Reference cycles: 3.55
- UOPS_EXECUTED.THREAD: 10.01
- RETIRE_SLOTS: 10.0
- UOPS_MITE: 0.03
- UOPS_MS: 0.03
- UOPS_PORT_0: 4.3
- UOPS_PORT_1: 0.33
- UOPS_PORT_6: 4.7
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.67
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	66 45 11 ca          	adc    r10w,r9w
   b:	66 45 11 cb          	adc    r11w,r9w
   f:	66 45 11 cc          	adc    r12w,r9w
  13:	66 45 11 cd          	adc    r13w,r9w
  17:	66 45 11 ce          	adc    r14w,r9w
  1b:	66 44 11 cb          	adc    bx,r9w
  1f:	66 44 11 c9          	adc    cx,r9w

Show nanoBench command
Results:
- Instructions retired: 9.2
- Core cycles: 4.63
- Reference cycles: 3.42
- UOPS_EXECUTED.THREAD: 9.1
- RETIRE_SLOTS: 9.11
- UOPS_MITE: 0.04
- UOPS_MS: 0.01
- UOPS_PORT_0: 4.0
- UOPS_PORT_1: 0.24
- UOPS_PORT_6: 4.09
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.75
- UOPS_PORT_5B>=2: 0.04
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With additional dependency-breaking instructions (before each instruction)

With unroll_count=100 and no inner loop

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 ca          	adc    r10w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 cb          	adc    r11w,r9w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 cc          	adc    r12w,r9w
  1c:	4d 85 ff             	test   r15,r15
  1f:	66 45 11 cd          	adc    r13w,r9w
  23:	4d 85 ff             	test   r15,r15
  26:	66 45 11 ce          	adc    r14w,r9w
  2a:	4d 85 ff             	test   r15,r15
  2d:	66 44 11 cb          	adc    bx,r9w
  31:	4d 85 ff             	test   r15,r15
  34:	66 44 11 c9          	adc    cx,r9w

Show nanoBench command
Results:
- Instructions retired: 16.0
- Core cycles: 4.04
- Reference cycles: 2.88
- UOPS_EXECUTED.THREAD: 16.01
- RETIRE_SLOTS: 16.0
- UOPS_MITE: 15.42
- UOPS_MS: 0.36
- UOPS_PORT_0: 4.03
- UOPS_PORT_1: 2.55
- UOPS_PORT_6: 4.03
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 5.41
- UOPS_PORT_5B>=2: 2.01
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 3.36

With loop_count=1000 and unroll_count=1

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 ca          	adc    r10w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 cb          	adc    r11w,r9w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 cc          	adc    r12w,r9w
  1c:	4d 85 ff             	test   r15,r15
  1f:	66 45 11 cd          	adc    r13w,r9w
  23:	4d 85 ff             	test   r15,r15
  26:	66 45 11 ce          	adc    r14w,r9w
  2a:	4d 85 ff             	test   r15,r15
  2d:	66 44 11 cb          	adc    bx,r9w
  31:	4d 85 ff             	test   r15,r15
  34:	66 44 11 c9          	adc    cx,r9w

Show nanoBench command
Results:
- Instructions retired: 18.0
- Core cycles: 4.78
- Reference cycles: 3.57
- UOPS_EXECUTED.THREAD: 17.01
- RETIRE_SLOTS: 17.0
- UOPS_MITE: -0.01
- UOPS_MS: 0.04
- UOPS_PORT_0: 4.25
- UOPS_PORT_1: 2.63
- UOPS_PORT_6: 4.76
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 5.38
- UOPS_PORT_5B>=2: 2.36
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 ca          	adc    r10w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 cb          	adc    r11w,r9w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 cc          	adc    r12w,r9w
  1c:	4d 85 ff             	test   r15,r15
  1f:	66 45 11 cd          	adc    r13w,r9w
  23:	4d 85 ff             	test   r15,r15
  26:	66 45 11 ce          	adc    r14w,r9w
  2a:	4d 85 ff             	test   r15,r15
  2d:	66 44 11 cb          	adc    bx,r9w
  31:	4d 85 ff             	test   r15,r15
  34:	66 44 11 c9          	adc    cx,r9w

Show nanoBench command
Results:
- Instructions retired: 16.2
- Core cycles: 4.23
- Reference cycles: 3.17
- UOPS_EXECUTED.THREAD: 16.1
- RETIRE_SLOTS: 16.1
- UOPS_MITE: 0.13
- UOPS_MS: 0.03
- UOPS_PORT_0: 4.01
- UOPS_PORT_1: 2.66
- UOPS_PORT_6: 4.09
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 5.34
- UOPS_PORT_5B>=2: 2.62
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.03

With 13 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	66 45 11 c8          	adc    r8w,r9w
   4:	66 45 11 ca          	adc    r10w,r9w
   8:	66 45 11 cb          	adc    r11w,r9w
   c:	66 45 11 cc          	adc    r12w,r9w
  10:	66 45 11 cd          	adc    r13w,r9w
  14:	66 45 11 ce          	adc    r14w,r9w
  18:	66 44 11 cb          	adc    bx,r9w
  1c:	66 44 11 c9          	adc    cx,r9w
  20:	66 44 11 ca          	adc    dx,r9w
  24:	66 44 11 c8          	adc    ax,r9w
  28:	66 44 11 cf          	adc    di,r9w
  2c:	66 44 11 ce          	adc    si,r9w
  30:	66 44 11 cd          	adc    bp,r9w

Show nanoBench command
Results:
- Instructions retired: 13.0
- Core cycles: 13.0
- Reference cycles: 9.92
- UOPS_EXECUTED.THREAD: 13.0
- RETIRE_SLOTS: 13.0
- UOPS_MITE: 12.76
- UOPS_MS: 0.0
- UOPS_PORT_0: 6.5
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 6.5
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 2.24

With loop_count=1000 and unroll_count=1

Code:

   0:	66 45 11 c8          	adc    r8w,r9w
   4:	66 45 11 ca          	adc    r10w,r9w
   8:	66 45 11 cb          	adc    r11w,r9w
   c:	66 45 11 cc          	adc    r12w,r9w
  10:	66 45 11 cd          	adc    r13w,r9w
  14:	66 45 11 ce          	adc    r14w,r9w
  18:	66 44 11 cb          	adc    bx,r9w
  1c:	66 44 11 c9          	adc    cx,r9w
  20:	66 44 11 ca          	adc    dx,r9w
  24:	66 44 11 c8          	adc    ax,r9w
  28:	66 44 11 cf          	adc    di,r9w
  2c:	66 44 11 ce          	adc    si,r9w
  30:	66 44 11 cd          	adc    bp,r9w

Show nanoBench command
Results:
- Instructions retired: 15.0
- Core cycles: 13.0
- Reference cycles: 9.78
- UOPS_EXECUTED.THREAD: 14.0
- RETIRE_SLOTS: 14.0
- UOPS_MITE: -0.01
- UOPS_MS: 0.03
- UOPS_PORT_0: 6.5
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 7.49
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	66 45 11 c8          	adc    r8w,r9w
   4:	66 45 11 ca          	adc    r10w,r9w
   8:	66 45 11 cb          	adc    r11w,r9w
   c:	66 45 11 cc          	adc    r12w,r9w
  10:	66 45 11 cd          	adc    r13w,r9w
  14:	66 45 11 ce          	adc    r14w,r9w
  18:	66 44 11 cb          	adc    bx,r9w
  1c:	66 44 11 c9          	adc    cx,r9w
  20:	66 44 11 ca          	adc    dx,r9w
  24:	66 44 11 c8          	adc    ax,r9w
  28:	66 44 11 cf          	adc    di,r9w
  2c:	66 44 11 ce          	adc    si,r9w
  30:	66 44 11 cd          	adc    bp,r9w

Show nanoBench command
Results:
- Instructions retired: 13.2
- Core cycles: 13.0
- Reference cycles: 9.86
- UOPS_EXECUTED.THREAD: 13.1
- RETIRE_SLOTS: 13.1
- UOPS_MITE: 0.1
- UOPS_MS: 0.04
- UOPS_PORT_0: 6.49
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 6.61
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.02

With additional dependency-breaking instructions

With unroll_count=100 and no inner loop

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	66 45 11 ca          	adc    r10w,r9w
   b:	66 45 11 cb          	adc    r11w,r9w
   f:	66 45 11 cc          	adc    r12w,r9w
  13:	66 45 11 cd          	adc    r13w,r9w
  17:	66 45 11 ce          	adc    r14w,r9w
  1b:	66 44 11 cb          	adc    bx,r9w
  1f:	66 44 11 c9          	adc    cx,r9w
  23:	66 44 11 ca          	adc    dx,r9w
  27:	66 44 11 c8          	adc    ax,r9w
  2b:	66 44 11 cf          	adc    di,r9w
  2f:	66 44 11 ce          	adc    si,r9w
  33:	66 44 11 cd          	adc    bp,r9w

Show nanoBench command
Results:
- Instructions retired: 14.0
- Core cycles: 6.82
- Reference cycles: 5.44
- UOPS_EXECUTED.THREAD: 14.0
- RETIRE_SLOTS: 14.0
- UOPS_MITE: 14.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 6.46
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 6.54
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 1.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 2.56

With loop_count=1000 and unroll_count=1

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	66 45 11 ca          	adc    r10w,r9w
   b:	66 45 11 cb          	adc    r11w,r9w
   f:	66 45 11 cc          	adc    r12w,r9w
  13:	66 45 11 cd          	adc    r13w,r9w
  17:	66 45 11 ce          	adc    r14w,r9w
  1b:	66 44 11 cb          	adc    bx,r9w
  1f:	66 44 11 c9          	adc    cx,r9w
  23:	66 44 11 ca          	adc    dx,r9w
  27:	66 44 11 c8          	adc    ax,r9w
  2b:	66 44 11 cf          	adc    di,r9w
  2f:	66 44 11 ce          	adc    si,r9w
  33:	66 44 11 cd          	adc    bp,r9w

Show nanoBench command
Results:
- Instructions retired: 16.0
- Core cycles: 7.22
- Reference cycles: 5.44
- UOPS_EXECUTED.THREAD: 15.0
- RETIRE_SLOTS: 15.0
- UOPS_MITE: 0.0
- UOPS_MS: 0.04
- UOPS_PORT_0: 6.8
- UOPS_PORT_1: 0.27
- UOPS_PORT_6: 7.21
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.73
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	66 45 11 ca          	adc    r10w,r9w
   b:	66 45 11 cb          	adc    r11w,r9w
   f:	66 45 11 cc          	adc    r12w,r9w
  13:	66 45 11 cd          	adc    r13w,r9w
  17:	66 45 11 ce          	adc    r14w,r9w
  1b:	66 44 11 cb          	adc    bx,r9w
  1f:	66 44 11 c9          	adc    cx,r9w
  23:	66 44 11 ca          	adc    dx,r9w
  27:	66 44 11 c8          	adc    ax,r9w
  2b:	66 44 11 cf          	adc    di,r9w
  2f:	66 44 11 ce          	adc    si,r9w
  33:	66 44 11 cd          	adc    bp,r9w

Show nanoBench command
Results:
- Instructions retired: 14.2
- Core cycles: 6.91
- Reference cycles: 5.18
- UOPS_EXECUTED.THREAD: 14.1
- RETIRE_SLOTS: 14.1
- UOPS_MITE: 0.11
- UOPS_MS: 0.03
- UOPS_PORT_0: 6.49
- UOPS_PORT_1: 0.22
- UOPS_PORT_6: 6.61
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.77
- UOPS_PORT_5B>=2: 0.08
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.02

With additional dependency-breaking instructions (before each instruction)

With unroll_count=100 and no inner loop

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 ca          	adc    r10w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 cb          	adc    r11w,r9w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 cc          	adc    r12w,r9w
  1c:	4d 85 ff             	test   r15,r15
  1f:	66 45 11 cd          	adc    r13w,r9w
  23:	4d 85 ff             	test   r15,r15
  26:	66 45 11 ce          	adc    r14w,r9w
  2a:	4d 85 ff             	test   r15,r15
  2d:	66 44 11 cb          	adc    bx,r9w
  31:	4d 85 ff             	test   r15,r15
  34:	66 44 11 c9          	adc    cx,r9w
  38:	4d 85 ff             	test   r15,r15
  3b:	66 44 11 ca          	adc    dx,r9w
  3f:	4d 85 ff             	test   r15,r15
  42:	66 44 11 c8          	adc    ax,r9w
  46:	4d 85 ff             	test   r15,r15
  49:	66 44 11 cf          	adc    di,r9w
  4d:	4d 85 ff             	test   r15,r15
  50:	66 44 11 ce          	adc    si,r9w
  54:	4d 85 ff             	test   r15,r15
  57:	66 44 11 cd          	adc    bp,r9w

Show nanoBench command
Results:
- Instructions retired: 26.0
- Core cycles: 6.5
- Reference cycles: 4.8
- UOPS_EXECUTED.THREAD: 25.99
- RETIRE_SLOTS: 26.0
- UOPS_MITE: 26.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 6.48
- UOPS_PORT_1: 4.17
- UOPS_PORT_6: 6.52
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 8.86
- UOPS_PORT_5B>=2: 3.1
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 5.36

With loop_count=1000 and unroll_count=1

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 ca          	adc    r10w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 cb          	adc    r11w,r9w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 cc          	adc    r12w,r9w
  1c:	4d 85 ff             	test   r15,r15
  1f:	66 45 11 cd          	adc    r13w,r9w
  23:	4d 85 ff             	test   r15,r15
  26:	66 45 11 ce          	adc    r14w,r9w
  2a:	4d 85 ff             	test   r15,r15
  2d:	66 44 11 cb          	adc    bx,r9w
  31:	4d 85 ff             	test   r15,r15
  34:	66 44 11 c9          	adc    cx,r9w
  38:	4d 85 ff             	test   r15,r15
  3b:	66 44 11 ca          	adc    dx,r9w
  3f:	4d 85 ff             	test   r15,r15
  42:	66 44 11 c8          	adc    ax,r9w
  46:	4d 85 ff             	test   r15,r15
  49:	66 44 11 cf          	adc    di,r9w
  4d:	4d 85 ff             	test   r15,r15
  50:	66 44 11 ce          	adc    si,r9w
  54:	4d 85 ff             	test   r15,r15
  57:	66 44 11 cd          	adc    bp,r9w

Show nanoBench command
Results:
- Instructions retired: 28.0
- Core cycles: 7.37
- Reference cycles: 5.55
- UOPS_EXECUTED.THREAD: 27.01
- RETIRE_SLOTS: 27.0
- UOPS_MITE: 0.06
- UOPS_MS: 0.04
- UOPS_PORT_0: 6.67
- UOPS_PORT_1: 4.27
- UOPS_PORT_6: 7.34
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 8.74
- UOPS_PORT_5B>=2: 3.93
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With loop_count=100 and unroll_count=10

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c8          	adc    r8w,r9w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 ca          	adc    r10w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 cb          	adc    r11w,r9w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 cc          	adc    r12w,r9w
  1c:	4d 85 ff             	test   r15,r15
  1f:	66 45 11 cd          	adc    r13w,r9w
  23:	4d 85 ff             	test   r15,r15
  26:	66 45 11 ce          	adc    r14w,r9w
  2a:	4d 85 ff             	test   r15,r15
  2d:	66 44 11 cb          	adc    bx,r9w
  31:	4d 85 ff             	test   r15,r15
  34:	66 44 11 c9          	adc    cx,r9w
  38:	4d 85 ff             	test   r15,r15
  3b:	66 44 11 ca          	adc    dx,r9w
  3f:	4d 85 ff             	test   r15,r15
  42:	66 44 11 c8          	adc    ax,r9w
  46:	4d 85 ff             	test   r15,r15
  49:	66 44 11 cf          	adc    di,r9w
  4d:	4d 85 ff             	test   r15,r15
  50:	66 44 11 ce          	adc    si,r9w
  54:	4d 85 ff             	test   r15,r15
  57:	66 44 11 cd          	adc    bp,r9w

Show nanoBench command
Results:
- Instructions retired: 26.2
- Core cycles: 6.69
- Reference cycles: 4.99
- UOPS_EXECUTED.THREAD: 26.1
- RETIRE_SLOTS: 26.1
- UOPS_MITE: 0.23
- UOPS_MS: 0.04
- UOPS_PORT_0: 6.5
- UOPS_PORT_1: 4.3
- UOPS_PORT_6: 6.6
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 8.7
- UOPS_PORT_5B>=2: 4.29
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.05

With the same register for for different operands

With 1 independent instruction

With unroll_count=500 and no inner loop

Code:

   0:	66 45 11 c0          	adc    r8w,r8w

Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 1.0
- Reference cycles: 0.77
- UOPS_EXECUTED.THREAD: 1.0
- RETIRE_SLOTS: 1.0
- UOPS_MITE: 1.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 0.5
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.17

With loop_count=1000 and unroll_count=10

Code:

   0:	66 45 11 c0          	adc    r8w,r8w

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 1.0
- Reference cycles: 0.75
- UOPS_EXECUTED.THREAD: 1.1
- RETIRE_SLOTS: 1.1
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 0.6
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	66 45 11 c0          	adc    r8w,r8w

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 1.0
- Reference cycles: 0.75
- UOPS_EXECUTED.THREAD: 1.01
- RETIRE_SLOTS: 1.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 0.51
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With additional dependency-breaking instructions

With unroll_count=500 and no inner loop

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w

Show nanoBench command
Results:
- Instructions retired: 2.0
- Core cycles: 1.0
- Reference cycles: 0.77
- UOPS_EXECUTED.THREAD: 2.0
- RETIRE_SLOTS: 2.0
- UOPS_MITE: 2.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.31
- UOPS_PORT_6: 0.5
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.7
- UOPS_PORT_5B>=2: 0.16
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.38

With loop_count=1000 and unroll_count=10

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w

Show nanoBench command
Results:
- Instructions retired: 2.2
- Core cycles: 1.0
- Reference cycles: 0.75
- UOPS_EXECUTED.THREAD: 2.1
- RETIRE_SLOTS: 2.1
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.32
- UOPS_PORT_6: 0.6
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.68
- UOPS_PORT_5B>=2: 0.21
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w

Show nanoBench command
Results:
- Instructions retired: 2.02
- Core cycles: 1.0
- Reference cycles: 0.75
- UOPS_EXECUTED.THREAD: 2.01
- RETIRE_SLOTS: 2.01
- UOPS_MITE: 0.02
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.32
- UOPS_PORT_6: 0.51
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.68
- UOPS_PORT_5B>=2: 0.25
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	66 45 11 c0          	adc    r8w,r8w
   4:	66 45 11 c9          	adc    r9w,r9w
   8:	66 45 11 d2          	adc    r10w,r10w
   c:	66 45 11 db          	adc    r11w,r11w

Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 3.99
- Reference cycles: 3.2
- UOPS_EXECUTED.THREAD: 4.0
- RETIRE_SLOTS: 4.0
- UOPS_MITE: 4.12
- UOPS_MS: 0.0
- UOPS_PORT_0: 2.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 2.0
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.72

With loop_count=1000 and unroll_count=2

Code:

   0:	66 45 11 c0          	adc    r8w,r8w
   4:	66 45 11 c9          	adc    r9w,r9w
   8:	66 45 11 d2          	adc    r10w,r10w
   c:	66 45 11 db          	adc    r11w,r11w

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 4.0
- Reference cycles: 3.02
- UOPS_EXECUTED.THREAD: 4.5
- RETIRE_SLOTS: 4.5
- UOPS_MITE: 0.0
- UOPS_MS: 0.01
- UOPS_PORT_0: 2.01
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 2.49
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	66 45 11 c0          	adc    r8w,r8w
   4:	66 45 11 c9          	adc    r9w,r9w
   8:	66 45 11 d2          	adc    r10w,r10w
   c:	66 45 11 db          	adc    r11w,r11w

Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 4.0
- Reference cycles: 2.99
- UOPS_EXECUTED.THREAD: 4.05
- RETIRE_SLOTS: 4.05
- UOPS_MITE: 0.02
- UOPS_MS: 0.02
- UOPS_PORT_0: 2.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 2.05
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With additional dependency-breaking instructions

With unroll_count=200 and no inner loop

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	66 45 11 c9          	adc    r9w,r9w
   b:	66 45 11 d2          	adc    r10w,r10w
   f:	66 45 11 db          	adc    r11w,r11w

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 2.43
- Reference cycles: 2.08
- UOPS_EXECUTED.THREAD: 5.01
- RETIRE_SLOTS: 5.0
- UOPS_MITE: 4.86
- UOPS_MS: 0.18
- UOPS_PORT_0: 2.0
- UOPS_PORT_1: 0.24
- UOPS_PORT_6: 2.01
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.76
- UOPS_PORT_5B>=2: 0.01
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.98

With loop_count=1000 and unroll_count=2

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	66 45 11 c9          	adc    r9w,r9w
   b:	66 45 11 d2          	adc    r10w,r10w
   f:	66 45 11 db          	adc    r11w,r11w

Show nanoBench command
Results:
- Instructions retired: 6.0
- Core cycles: 2.43
- Reference cycles: 1.82
- UOPS_EXECUTED.THREAD: 5.5
- RETIRE_SLOTS: 5.5
- UOPS_MITE: 0.0
- UOPS_MS: 0.02
- UOPS_PORT_0: 2.1
- UOPS_PORT_1: 0.32
- UOPS_PORT_6: 2.4
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.68
- UOPS_PORT_5B>=2: 0.12
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	66 45 11 c9          	adc    r9w,r9w
   b:	66 45 11 d2          	adc    r10w,r10w
   f:	66 45 11 db          	adc    r11w,r11w

Show nanoBench command
Results:
- Instructions retired: 5.1
- Core cycles: 2.36
- Reference cycles: 1.77
- UOPS_EXECUTED.THREAD: 5.05
- RETIRE_SLOTS: 5.05
- UOPS_MITE: 0.03
- UOPS_MS: 0.02
- UOPS_PORT_0: 2.0
- UOPS_PORT_1: 0.3
- UOPS_PORT_6: 2.05
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.71
- UOPS_PORT_5B>=2: 0.02
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With additional dependency-breaking instructions (before each instruction)

With unroll_count=200 and no inner loop

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 c9          	adc    r9w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 d2          	adc    r10w,r10w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 db          	adc    r11w,r11w

Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 2.39
- Reference cycles: 1.68
- UOPS_EXECUTED.THREAD: 8.0
- RETIRE_SLOTS: 8.0
- UOPS_MITE: 7.83
- UOPS_MS: 0.19
- UOPS_PORT_0: 2.0
- UOPS_PORT_1: 1.26
- UOPS_PORT_6: 2.03
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 2.71
- UOPS_PORT_5B>=2: 0.89
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.63

With loop_count=1000 and unroll_count=2

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 c9          	adc    r9w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 d2          	adc    r10w,r10w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 db          	adc    r11w,r11w

Show nanoBench command
Results:
- Instructions retired: 9.0
- Core cycles: 2.39
- Reference cycles: 1.78
- UOPS_EXECUTED.THREAD: 8.5
- RETIRE_SLOTS: 8.5
- UOPS_MITE: 0.0
- UOPS_MS: 0.02
- UOPS_PORT_0: 2.13
- UOPS_PORT_1: 1.31
- UOPS_PORT_6: 2.37
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 2.69
- UOPS_PORT_5B>=2: 1.23
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 c9          	adc    r9w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 d2          	adc    r10w,r10w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 db          	adc    r11w,r11w

Show nanoBench command
Results:
- Instructions retired: 8.1
- Core cycles: 2.33
- Reference cycles: 1.74
- UOPS_EXECUTED.THREAD: 8.05
- RETIRE_SLOTS: 8.05
- UOPS_MITE: 0.06
- UOPS_MS: 0.02
- UOPS_PORT_0: 2.01
- UOPS_PORT_1: 1.31
- UOPS_PORT_6: 2.04
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 2.69
- UOPS_PORT_5B>=2: 1.18
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	66 45 11 c0          	adc    r8w,r8w
   4:	66 45 11 c9          	adc    r9w,r9w
   8:	66 45 11 d2          	adc    r10w,r10w
   c:	66 45 11 db          	adc    r11w,r11w
  10:	66 45 11 e4          	adc    r12w,r12w
  14:	66 45 11 ed          	adc    r13w,r13w
  18:	66 45 11 f6          	adc    r14w,r14w
  1c:	66 11 db             	adc    bx,bx

Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 7.99
- Reference cycles: 5.76
- UOPS_EXECUTED.THREAD: 8.0
- RETIRE_SLOTS: 8.0
- UOPS_MITE: 8.19
- UOPS_MS: 0.0
- UOPS_PORT_0: 4.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 4.0
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.47

With loop_count=1000 and unroll_count=1

Code:

   0:	66 45 11 c0          	adc    r8w,r8w
   4:	66 45 11 c9          	adc    r9w,r9w
   8:	66 45 11 d2          	adc    r10w,r10w
   c:	66 45 11 db          	adc    r11w,r11w
  10:	66 45 11 e4          	adc    r12w,r12w
  14:	66 45 11 ed          	adc    r13w,r13w
  18:	66 45 11 f6          	adc    r14w,r14w
  1c:	66 11 db             	adc    bx,bx

Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 8.0
- Reference cycles: 6.06
- UOPS_EXECUTED.THREAD: 9.0
- RETIRE_SLOTS: 9.0
- UOPS_MITE: 0.39
- UOPS_MS: 0.04
- UOPS_PORT_0: 4.03
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 4.97
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.08

With loop_count=100 and unroll_count=10

Code:

   0:	66 45 11 c0          	adc    r8w,r8w
   4:	66 45 11 c9          	adc    r9w,r9w
   8:	66 45 11 d2          	adc    r10w,r10w
   c:	66 45 11 db          	adc    r11w,r11w
  10:	66 45 11 e4          	adc    r12w,r12w
  14:	66 45 11 ed          	adc    r13w,r13w
  18:	66 45 11 f6          	adc    r14w,r14w
  1c:	66 11 db             	adc    bx,bx

Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 8.0
- Reference cycles: 6.0
- UOPS_EXECUTED.THREAD: 8.1
- RETIRE_SLOTS: 8.1
- UOPS_MITE: 0.05
- UOPS_MS: 0.03
- UOPS_PORT_0: 4.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 4.1
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With additional dependency-breaking instructions

With unroll_count=100 and no inner loop

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	66 45 11 c9          	adc    r9w,r9w
   b:	66 45 11 d2          	adc    r10w,r10w
   f:	66 45 11 db          	adc    r11w,r11w
  13:	66 45 11 e4          	adc    r12w,r12w
  17:	66 45 11 ed          	adc    r13w,r13w
  1b:	66 45 11 f6          	adc    r14w,r14w
  1f:	66 11 db             	adc    bx,bx

Show nanoBench command
Results:
- Instructions retired: 9.0
- Core cycles: 4.0
- Reference cycles: 2.88
- UOPS_EXECUTED.THREAD: 9.0
- RETIRE_SLOTS: 9.0
- UOPS_MITE: 9.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 4.0
- UOPS_PORT_1: 0.28
- UOPS_PORT_6: 4.0
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.72
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.75

With loop_count=1000 and unroll_count=1

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	66 45 11 c9          	adc    r9w,r9w
   b:	66 45 11 d2          	adc    r10w,r10w
   f:	66 45 11 db          	adc    r11w,r11w
  13:	66 45 11 e4          	adc    r12w,r12w
  17:	66 45 11 ed          	adc    r13w,r13w
  1b:	66 45 11 f6          	adc    r14w,r14w
  1f:	66 11 db             	adc    bx,bx

Show nanoBench command
Results:
- Instructions retired: 11.0
- Core cycles: 4.74
- Reference cycles: 3.58
- UOPS_EXECUTED.THREAD: 10.01
- RETIRE_SLOTS: 10.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.03
- UOPS_PORT_0: 4.31
- UOPS_PORT_1: 0.3
- UOPS_PORT_6: 4.69
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.67
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	66 45 11 c9          	adc    r9w,r9w
   b:	66 45 11 d2          	adc    r10w,r10w
   f:	66 45 11 db          	adc    r11w,r11w
  13:	66 45 11 e4          	adc    r12w,r12w
  17:	66 45 11 ed          	adc    r13w,r13w
  1b:	66 45 11 f6          	adc    r14w,r14w
  1f:	66 11 db             	adc    bx,bx

Show nanoBench command
Results:
- Instructions retired: 9.2
- Core cycles: 4.51
- Reference cycles: 3.38
- UOPS_EXECUTED.THREAD: 9.1
- RETIRE_SLOTS: 9.1
- UOPS_MITE: 0.07
- UOPS_MS: 0.04
- UOPS_PORT_0: 4.0
- UOPS_PORT_1: 0.27
- UOPS_PORT_6: 4.1
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.74
- UOPS_PORT_5B>=2: 0.06
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.02

With additional dependency-breaking instructions (before each instruction)

With unroll_count=100 and no inner loop

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 c9          	adc    r9w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 d2          	adc    r10w,r10w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 db          	adc    r11w,r11w
  1c:	4d 85 ff             	test   r15,r15
  1f:	66 45 11 e4          	adc    r12w,r12w
  23:	4d 85 ff             	test   r15,r15
  26:	66 45 11 ed          	adc    r13w,r13w
  2a:	4d 85 ff             	test   r15,r15
  2d:	66 45 11 f6          	adc    r14w,r14w
  31:	4d 85 ff             	test   r15,r15
  34:	66 11 db             	adc    bx,bx

Show nanoBench command
Results:
- Instructions retired: 16.0
- Core cycles: 4.0
- Reference cycles: 2.88
- UOPS_EXECUTED.THREAD: 16.01
- RETIRE_SLOTS: 16.0
- UOPS_MITE: 15.76
- UOPS_MS: 0.0
- UOPS_PORT_0: 4.01
- UOPS_PORT_1: 2.55
- UOPS_PORT_6: 3.99
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 5.47
- UOPS_PORT_5B>=2: 1.98
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 3.23

With loop_count=1000 and unroll_count=1

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 c9          	adc    r9w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 d2          	adc    r10w,r10w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 db          	adc    r11w,r11w
  1c:	4d 85 ff             	test   r15,r15
  1f:	66 45 11 e4          	adc    r12w,r12w
  23:	4d 85 ff             	test   r15,r15
  26:	66 45 11 ed          	adc    r13w,r13w
  2a:	4d 85 ff             	test   r15,r15
  2d:	66 45 11 f6          	adc    r14w,r14w
  31:	4d 85 ff             	test   r15,r15
  34:	66 11 db             	adc    bx,bx

Show nanoBench command
Results:
- Instructions retired: 18.0
- Core cycles: 4.79
- Reference cycles: 3.6
- UOPS_EXECUTED.THREAD: 17.02
- RETIRE_SLOTS: 17.0
- UOPS_MITE: -0.01
- UOPS_MS: 0.04
- UOPS_PORT_0: 4.25
- UOPS_PORT_1: 2.63
- UOPS_PORT_6: 4.76
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 5.38
- UOPS_PORT_5B>=2: 2.36
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 c9          	adc    r9w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 d2          	adc    r10w,r10w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 db          	adc    r11w,r11w
  1c:	4d 85 ff             	test   r15,r15
  1f:	66 45 11 e4          	adc    r12w,r12w
  23:	4d 85 ff             	test   r15,r15
  26:	66 45 11 ed          	adc    r13w,r13w
  2a:	4d 85 ff             	test   r15,r15
  2d:	66 45 11 f6          	adc    r14w,r14w
  31:	4d 85 ff             	test   r15,r15
  34:	66 11 db             	adc    bx,bx

Show nanoBench command
Results:
- Instructions retired: 16.2
- Core cycles: 4.23
- Reference cycles: 3.17
- UOPS_EXECUTED.THREAD: 16.1
- RETIRE_SLOTS: 16.1
- UOPS_MITE: 0.12
- UOPS_MS: 0.03
- UOPS_PORT_0: 4.01
- UOPS_PORT_1: 2.66
- UOPS_PORT_6: 4.09
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 5.34
- UOPS_PORT_5B>=2: 2.62
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.03

With 14 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	66 45 11 c0          	adc    r8w,r8w
   4:	66 45 11 c9          	adc    r9w,r9w
   8:	66 45 11 d2          	adc    r10w,r10w
   c:	66 45 11 db          	adc    r11w,r11w
  10:	66 45 11 e4          	adc    r12w,r12w
  14:	66 45 11 ed          	adc    r13w,r13w
  18:	66 45 11 f6          	adc    r14w,r14w
  1c:	66 11 db             	adc    bx,bx
  1f:	66 11 c9             	adc    cx,cx
  22:	66 11 d2             	adc    dx,dx
  25:	66 11 c0             	adc    ax,ax
  28:	66 11 ff             	adc    di,di
  2b:	66 11 f6             	adc    si,si
  2e:	66 11 ed             	adc    bp,bp

Show nanoBench command
Results:
- Instructions retired: 14.0
- Core cycles: 14.01
- Reference cycles: 10.56
- UOPS_EXECUTED.THREAD: 14.02
- RETIRE_SLOTS: 14.0
- UOPS_MITE: 14.24
- UOPS_MS: 0.0
- UOPS_PORT_0: 7.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 7.0
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 2.65

With loop_count=1000 and unroll_count=1

Code:

   0:	66 45 11 c0          	adc    r8w,r8w
   4:	66 45 11 c9          	adc    r9w,r9w
   8:	66 45 11 d2          	adc    r10w,r10w
   c:	66 45 11 db          	adc    r11w,r11w
  10:	66 45 11 e4          	adc    r12w,r12w
  14:	66 45 11 ed          	adc    r13w,r13w
  18:	66 45 11 f6          	adc    r14w,r14w
  1c:	66 11 db             	adc    bx,bx
  1f:	66 11 c9             	adc    cx,cx
  22:	66 11 d2             	adc    dx,dx
  25:	66 11 c0             	adc    ax,ax
  28:	66 11 ff             	adc    di,di
  2b:	66 11 f6             	adc    si,si
  2e:	66 11 ed             	adc    bp,bp

Show nanoBench command
Results:
- Instructions retired: 16.0
- Core cycles: 14.0
- Reference cycles: 10.54
- UOPS_EXECUTED.THREAD: 15.0
- RETIRE_SLOTS: 15.0
- UOPS_MITE: -0.01
- UOPS_MS: 0.03
- UOPS_PORT_0: 7.05
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 7.95
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	66 45 11 c0          	adc    r8w,r8w
   4:	66 45 11 c9          	adc    r9w,r9w
   8:	66 45 11 d2          	adc    r10w,r10w
   c:	66 45 11 db          	adc    r11w,r11w
  10:	66 45 11 e4          	adc    r12w,r12w
  14:	66 45 11 ed          	adc    r13w,r13w
  18:	66 45 11 f6          	adc    r14w,r14w
  1c:	66 11 db             	adc    bx,bx
  1f:	66 11 c9             	adc    cx,cx
  22:	66 11 d2             	adc    dx,dx
  25:	66 11 c0             	adc    ax,ax
  28:	66 11 ff             	adc    di,di
  2b:	66 11 f6             	adc    si,si
  2e:	66 11 ed             	adc    bp,bp

Show nanoBench command
Results:
- Instructions retired: 14.2
- Core cycles: 14.0
- Reference cycles: 10.56
- UOPS_EXECUTED.THREAD: 14.1
- RETIRE_SLOTS: 14.1
- UOPS_MITE: 0.11
- UOPS_MS: 0.03
- UOPS_PORT_0: 6.97
- UOPS_PORT_1: 0.0
- UOPS_PORT_6: 7.13
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.02

With additional dependency-breaking instructions

With unroll_count=100 and no inner loop

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	66 45 11 c9          	adc    r9w,r9w
   b:	66 45 11 d2          	adc    r10w,r10w
   f:	66 45 11 db          	adc    r11w,r11w
  13:	66 45 11 e4          	adc    r12w,r12w
  17:	66 45 11 ed          	adc    r13w,r13w
  1b:	66 45 11 f6          	adc    r14w,r14w
  1f:	66 11 db             	adc    bx,bx
  22:	66 11 c9             	adc    cx,cx
  25:	66 11 d2             	adc    dx,dx
  28:	66 11 c0             	adc    ax,ax
  2b:	66 11 ff             	adc    di,di
  2e:	66 11 f6             	adc    si,si
  31:	66 11 ed             	adc    bp,bp

Show nanoBench command
Results:
- Instructions retired: 15.0
- Core cycles: 7.01
- Reference cycles: 5.28
- UOPS_EXECUTED.THREAD: 15.0
- RETIRE_SLOTS: 15.0
- UOPS_MITE: 15.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 7.0
- UOPS_PORT_1: 0.01
- UOPS_PORT_6: 7.0
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 1.0
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 2.83

With loop_count=1000 and unroll_count=1

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	66 45 11 c9          	adc    r9w,r9w
   b:	66 45 11 d2          	adc    r10w,r10w
   f:	66 45 11 db          	adc    r11w,r11w
  13:	66 45 11 e4          	adc    r12w,r12w
  17:	66 45 11 ed          	adc    r13w,r13w
  1b:	66 45 11 f6          	adc    r14w,r14w
  1f:	66 11 db             	adc    bx,bx
  22:	66 11 c9             	adc    cx,cx
  25:	66 11 d2             	adc    dx,dx
  28:	66 11 c0             	adc    ax,ax
  2b:	66 11 ff             	adc    di,di
  2e:	66 11 f6             	adc    si,si
  31:	66 11 ed             	adc    bp,bp

Show nanoBench command
Results:
- Instructions retired: 17.0
- Core cycles: 7.78
- Reference cycles: 5.86
- UOPS_EXECUTED.THREAD: 16.0
- RETIRE_SLOTS: 16.0
- UOPS_MITE: 0.0
- UOPS_MS: 0.03
- UOPS_PORT_0: 7.27
- UOPS_PORT_1: 0.35
- UOPS_PORT_6: 7.73
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.65
- UOPS_PORT_5B>=2: 0.0
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	66 45 11 c9          	adc    r9w,r9w
   b:	66 45 11 d2          	adc    r10w,r10w
   f:	66 45 11 db          	adc    r11w,r11w
  13:	66 45 11 e4          	adc    r12w,r12w
  17:	66 45 11 ed          	adc    r13w,r13w
  1b:	66 45 11 f6          	adc    r14w,r14w
  1f:	66 11 db             	adc    bx,bx
  22:	66 11 c9             	adc    cx,cx
  25:	66 11 d2             	adc    dx,dx
  28:	66 11 c0             	adc    ax,ax
  2b:	66 11 ff             	adc    di,di
  2e:	66 11 f6             	adc    si,si
  31:	66 11 ed             	adc    bp,bp

Show nanoBench command
Results:
- Instructions retired: 15.2
- Core cycles: 7.46
- Reference cycles: 5.62
- UOPS_EXECUTED.THREAD: 15.1
- RETIRE_SLOTS: 15.1
- UOPS_MITE: 0.13
- UOPS_MS: 0.04
- UOPS_PORT_0: 7.0
- UOPS_PORT_1: 0.17
- UOPS_PORT_6: 7.1
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 0.83
- UOPS_PORT_5B>=2: 0.07
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.03

With additional dependency-breaking instructions (before each instruction)

With unroll_count=100 and no inner loop

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 c9          	adc    r9w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 d2          	adc    r10w,r10w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 db          	adc    r11w,r11w
  1c:	4d 85 ff             	test   r15,r15
  1f:	66 45 11 e4          	adc    r12w,r12w
  23:	4d 85 ff             	test   r15,r15
  26:	66 45 11 ed          	adc    r13w,r13w
  2a:	4d 85 ff             	test   r15,r15
  2d:	66 45 11 f6          	adc    r14w,r14w
  31:	4d 85 ff             	test   r15,r15
  34:	66 11 db             	adc    bx,bx
  37:	4d 85 ff             	test   r15,r15
  3a:	66 11 c9             	adc    cx,cx
  3d:	4d 85 ff             	test   r15,r15
  40:	66 11 d2             	adc    dx,dx
  43:	4d 85 ff             	test   r15,r15
  46:	66 11 c0             	adc    ax,ax
  49:	4d 85 ff             	test   r15,r15
  4c:	66 11 ff             	adc    di,di
  4f:	4d 85 ff             	test   r15,r15
  52:	66 11 f6             	adc    si,si
  55:	4d 85 ff             	test   r15,r15
  58:	66 11 ed             	adc    bp,bp

Show nanoBench command
Results:
- Instructions retired: 28.0
- Core cycles: 7.04
- Reference cycles: 5.28
- UOPS_EXECUTED.THREAD: 27.99
- RETIRE_SLOTS: 28.0
- UOPS_MITE: 27.45
- UOPS_MS: 0.36
- UOPS_PORT_0: 7.02
- UOPS_PORT_1: 4.47
- UOPS_PORT_6: 7.04
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 9.46
- UOPS_PORT_5B>=2: 3.41
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 5.31

With loop_count=1000 and unroll_count=1

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 c9          	adc    r9w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 d2          	adc    r10w,r10w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 db          	adc    r11w,r11w
  1c:	4d 85 ff             	test   r15,r15
  1f:	66 45 11 e4          	adc    r12w,r12w
  23:	4d 85 ff             	test   r15,r15
  26:	66 45 11 ed          	adc    r13w,r13w
  2a:	4d 85 ff             	test   r15,r15
  2d:	66 45 11 f6          	adc    r14w,r14w
  31:	4d 85 ff             	test   r15,r15
  34:	66 11 db             	adc    bx,bx
  37:	4d 85 ff             	test   r15,r15
  3a:	66 11 c9             	adc    cx,cx
  3d:	4d 85 ff             	test   r15,r15
  40:	66 11 d2             	adc    dx,dx
  43:	4d 85 ff             	test   r15,r15
  46:	66 11 c0             	adc    ax,ax
  49:	4d 85 ff             	test   r15,r15
  4c:	66 11 ff             	adc    di,di
  4f:	4d 85 ff             	test   r15,r15
  52:	66 11 f6             	adc    si,si
  55:	4d 85 ff             	test   r15,r15
  58:	66 11 ed             	adc    bp,bp

Show nanoBench command
Results:
- Instructions retired: 30.0
- Core cycles: 7.86
- Reference cycles: 5.89
- UOPS_EXECUTED.THREAD: 29.01
- RETIRE_SLOTS: 29.0
- UOPS_MITE: 0.08
- UOPS_MS: 0.04
- UOPS_PORT_0: 7.17
- UOPS_PORT_1: 4.59
- UOPS_PORT_6: 7.83
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 9.41
- UOPS_PORT_5B>=2: 4.27
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With loop_count=100 and unroll_count=10

Code:

   0:	4d 85 ff             	test   r15,r15
   3:	66 45 11 c0          	adc    r8w,r8w
   7:	4d 85 ff             	test   r15,r15
   a:	66 45 11 c9          	adc    r9w,r9w
   e:	4d 85 ff             	test   r15,r15
  11:	66 45 11 d2          	adc    r10w,r10w
  15:	4d 85 ff             	test   r15,r15
  18:	66 45 11 db          	adc    r11w,r11w
  1c:	4d 85 ff             	test   r15,r15
  1f:	66 45 11 e4          	adc    r12w,r12w
  23:	4d 85 ff             	test   r15,r15
  26:	66 45 11 ed          	adc    r13w,r13w
  2a:	4d 85 ff             	test   r15,r15
  2d:	66 45 11 f6          	adc    r14w,r14w
  31:	4d 85 ff             	test   r15,r15
  34:	66 11 db             	adc    bx,bx
  37:	4d 85 ff             	test   r15,r15
  3a:	66 11 c9             	adc    cx,cx
  3d:	4d 85 ff             	test   r15,r15
  40:	66 11 d2             	adc    dx,dx
  43:	4d 85 ff             	test   r15,r15
  46:	66 11 c0             	adc    ax,ax
  49:	4d 85 ff             	test   r15,r15
  4c:	66 11 ff             	adc    di,di
  4f:	4d 85 ff             	test   r15,r15
  52:	66 11 f6             	adc    si,si
  55:	4d 85 ff             	test   r15,r15
  58:	66 11 ed             	adc    bp,bp

Show nanoBench command
Results:
- Instructions retired: 28.2
- Core cycles: 7.2
- Reference cycles: 5.41
- UOPS_EXECUTED.THREAD: 28.1
- RETIRE_SLOTS: 28.1
- UOPS_MITE: 24.91
- UOPS_MS: 0.04
- UOPS_PORT_0: 7.0
- UOPS_PORT_1: 4.66
- UOPS_PORT_6: 7.1
- UOPS_PORT_49: 0.0
- UOPS_PORT_78: 0.0
- UOPS_PORT_5B: 9.33
- UOPS_PORT_5B>=2: 4.62
- UOPS_PORT_23A: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.05

ADC_13 (R16, R16) - Throughput and Uops

With different registers for different operands

With 1 independent instruction

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With additional dependency-breaking instructions

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With additional dependency-breaking instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With additional dependency-breaking instructions (before each instruction)

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With additional dependency-breaking instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With additional dependency-breaking instructions (before each instruction)

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With 13 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With additional dependency-breaking instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With additional dependency-breaking instructions (before each instruction)

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With the same register for for different operands

With 1 independent instruction

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With additional dependency-breaking instructions

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With additional dependency-breaking instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With additional dependency-breaking instructions (before each instruction)

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With additional dependency-breaking instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With additional dependency-breaking instructions (before each instruction)

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With 14 independent instructions