JO (Rel32) - Throughput and Uops

With all flags set to 0

With unroll_count=500 and no inner loop

Code:
```
   0:	0f 80 00 00 00 00    	jo     0x6
```

Init:

pushfq;
and qword ptr [RSP], ~0x8D5;
popfq

Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 1.0
- Reference cycles: 1.0
- RS_UOPS_DISPATCHED: 1.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 1.0

With loop_count=1000 and unroll_count=10

Code:
```
   0:	0f 80 00 00 00 00    	jo     0x6
```

Init:

pushfq;
and qword ptr [RSP], ~0x8D5;
popfq

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 1.1
- Reference cycles: 1.1
- RS_UOPS_DISPATCHED: 1.2
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.1
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 1.1

With loop_count=100 and unroll_count=100

Code:
```
   0:	0f 80 00 00 00 00    	jo     0x6
```

Init:

pushfq;
and qword ptr [RSP], ~0x8D5;
popfq

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 1.01
- Reference cycles: 1.01
- RS_UOPS_DISPATCHED: 1.02
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.01
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 1.01

With all flags set to 1

With unroll_count=500 and no inner loop

Code:
```
   0:	0f 80 00 00 00 00    	jo     0x6
```

Init:

pushfq;
or qword ptr [RSP], 0x8D5;
popfq

Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 2.13
- Reference cycles: 2.13
- RS_UOPS_DISPATCHED: 1.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 1.0

With loop_count=1000 and unroll_count=10

Code:
```
   0:	0f 80 00 00 00 00    	jo     0x6
```

Init:

pushfq;
or qword ptr [RSP], 0x8D5;
popfq

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 1.1
- Reference cycles: 1.1
- RS_UOPS_DISPATCHED: 1.2
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.1
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 1.1

With loop_count=100 and unroll_count=100

Code:
```
   0:	0f 80 00 00 00 00    	jo     0x6
```

Init:

pushfq;
or qword ptr [RSP], 0x8D5;
popfq

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 1.02
- Reference cycles: 1.02
- RS_UOPS_DISPATCHED: 1.02
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.01
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 1.01